Contact Support
This spooky personalised Trick or Treat solar light is the ideal Halloween decoration!
Perfect for indoor or outdoor use to let the Trick or Treaters know you have sweeties!
The light can be personalised with any message over 3 lines, each containing up to 12 characters per line.
Please note that the text entered will appear in upper case.
'Trick or Treat. Please take a sweet.' is fixed text and cannot be changed.
Sign - Height 19cm / Width 13.5 cm / Depth 0.3 cm
Ground stick and solar panel base - Height 34cm / Width 14 cm / Depth 9 cm
Installation (2 options)
A. Connect the solar lamp base to the ground rod, and push it into the ground/pot where you would like it.
B. Drill two holes in the wall, insert the screws and hang up the solar light. (Screws included)
Peel off the protective film from the solar panel. Press and hold the button for 5 seconds on the bottom of the LED light to turn it on (note - cover the solar panel with your hand to test if it is on. Please note the item will not solar charge if it is not turned on.
No batteries or wires are required; ensure the solar panel light is in a sunny environment.
Short press the button to change the colour mode and light mode. The colour and light modes are below.
White, red, green, blue, orange, light blue, purple, flashing, strobe, fading and smooth.
Ideal for Halloween
Perfect for indoor or outdoor use to let the Trick or Treaters know you have sweeties!
The light can be personalised with any message over 3 lines, each containing up to 12 characters per line.
Please note that the text entered will appear in upper case.
'Trick or Treat. Please take a sweet.' is fixed text and cannot be changed.
Sign - Height 19cm / Width 13.5 cm / Depth 0.3 cm
Ground stick and solar panel base - Height 34cm / Width 14 cm / Depth 9 cm
Installation (2 options)
A. Connect the solar lamp base to the ground rod, and push it into the ground/pot where you would like it.
B. Drill two holes in the wall, insert the screws and hang up the solar light. (Screws included)
Peel off the protective film from the solar panel. Press and hold the button for 5 seconds on the bottom of the LED light to turn it on (note - cover the solar panel with your hand to test if it is on. Please note the item will not solar charge if it is not turned on.
No batteries or wires are required; ensure the solar panel light is in a sunny environment.
Short press the button to change the colour mode and light mode. The colour and light modes are below.
White, red, green, blue, orange, light blue, purple, flashing, strobe, fading and smooth.
Ideal for Halloween
| Estimated between and . Standard Tracked Delivery (2-4 days, excluding Sundays) £3.99 / Express Tracked Delivery (1-2 days, excluding Sundays) £6.99 |
Product Details
This spooky personalised Trick or Treat solar light is the ideal Halloween decoration!
Perfect for indoor or outdoor use to let the Trick or Treaters know you have sweeties!
The light can be personalised with any message over 3 lines, each containing up to 12 characters per line.
Please note that the text entered will appear in upper case.
'Trick or Treat. Please take a sweet.' is fixed text and cannot be changed.
Sign - Height 19cm / Width 13.5 cm / Depth 0.3 cm
Ground stick and solar panel base - Height 34cm / Width 14 cm / Depth 9 cm
Installation (2 options)
A. Connect the solar lamp base to the ground rod, and push it into the ground/pot where you would like it.
B. Drill two holes in the wall, insert the screws and hang up the solar light. (Screws included)
Peel off the protective film from the solar panel. Press and hold the button for 5 seconds on the bottom of the LED light to turn it on (note - cover the solar panel with your hand to test if it is on. Please note the item will not solar charge if it is not turned on.
No batteries or wires are required; ensure the solar panel light is in a sunny environment.
Short press the button to change the colour mode and light mode. The colour and light modes are below.
White, red, green, blue, orange, light blue, purple, flashing, strobe, fading and smooth.
Ideal for Halloween
Perfect for indoor or outdoor use to let the Trick or Treaters know you have sweeties!
The light can be personalised with any message over 3 lines, each containing up to 12 characters per line.
Please note that the text entered will appear in upper case.
'Trick or Treat. Please take a sweet.' is fixed text and cannot be changed.
Sign - Height 19cm / Width 13.5 cm / Depth 0.3 cm
Ground stick and solar panel base - Height 34cm / Width 14 cm / Depth 9 cm
Installation (2 options)
A. Connect the solar lamp base to the ground rod, and push it into the ground/pot where you would like it.
B. Drill two holes in the wall, insert the screws and hang up the solar light. (Screws included)
Peel off the protective film from the solar panel. Press and hold the button for 5 seconds on the bottom of the LED light to turn it on (note - cover the solar panel with your hand to test if it is on. Please note the item will not solar charge if it is not turned on.
No batteries or wires are required; ensure the solar panel light is in a sunny environment.
Short press the button to change the colour mode and light mode. The colour and light modes are below.
White, red, green, blue, orange, light blue, purple, flashing, strobe, fading and smooth.
Ideal for Halloween
Delivery Options
| Estimated between and . Standard Tracked Delivery (2-4 days, excluding Sundays) £3.99 / Express Tracked Delivery (1-2 days, excluding Sundays) £6.99 |
Item Added to Your Cart
Customers also bought...
Item Added to Your Cart
Customers also bought...
Item Added to Your Cart
Customers also bought...